|
Product
Name
|
Chemical
Constitution
|
Application
|
ACTICIDE® 45
ACTICIDE® OTW |
Liquid octylisothiazolinone
Aqueous dispersion of octylisothiazolinone
(Zero VOC) |
Provides fungal protection in both wet state and dry film applications |
ACTICIDE® B 10/
B 20
ACTICIDE® BW 10/
BW 20 |
Glycol based benzisothiazolinone
Aqueous based benzisothiazolinone
(Zero VOC) |
Wet state biocides for the control of microorganisms, particularly in higher pH systems. Available in 10% and 20% active concentrations. FDA clearances include 121 CFR 175.105, 176.170, 176.180 and 176.300 |
ACTICIDE® C 98
ACTICIDE® C 40 |
Powder form of tetrachloroisophthalonitrile
Aqueous dispersion of tetrachloroisophthalonitrile |
For the dry film protection of interior and exterior coatings from fungal growth |
|
ACTICIDE® CT ACTICIDE® LG |
Aqueous blends of chlorinated and non-chlorinated isothiazolinones with unique non-metal salt stabilization systems
(Zero VOC) |
For wet state preservation of water based products such as paints, coatings, adhesives, inks and polymers. Approved for use in craft products by the ACMI. FDA clearances include 121 CFR 175.105, 176.170, 176.180 and 176.300 |
|
ACTICIDE® LA ACTICIDE® GA |
Aqueous blends of chlorinated and non-chlorinated isothiazolinones and 2-bromo-2-nitro-1, 3-propanediol
(Zero VOC) |
Combination wet state biocides for water based products. The active ingredients provide a wide spectrum of activity against both bacteria and fungi, including species that are difficult to control. These blends are particularly effective against pre-existing contamination. Approved for use in craft products by the ACMI. FDA clearances include 121 CFR 175.105, 176.170, 176.180 and 176.300 |
|
ACTICIDE® MBS |
Aqueous synergistic blend of methyl and benzisothiazolinone |
This patented blend is a unique combination wet state biocide with activity across a broad pH range, stable to 800C, and with reduced sensitivity. FDA clearances include 121 CFR 175.105, 176.170 and 176.180 |
|
ACTICIDE® PA |
Aqueous fungicide/algaecide combination |
An enhanced dry film fungicide/algaecide for exterior coatings. This water based, VOC free biocide provides protection to a wide product range intended for varied climatic conditions |
|
ACTICIDE® PM |
Powder fungicide/algaecide |
For the dry film protection of exterior solvent and water based coatings, wood stains, adhesives, fillers and sealants. |
|
ACTICIDE® PM Flowable |
Aqueous fungicide/algaecide combination |
A water based, VOC free fungicide for the dry film protection of exterior solvent based coatings |
Product information is for general guidance
only – please contact Thor for Product Data Sheets
and technical advice.
